GeneralWindows Errors

How to Easily Fix 5 Common LG Washer Error Codes: A Comprehensive Guide

1. Introduction to LG Washer Error Codes

LG washing machines are renowned for their reliability and advanced features. However, like any other machines, they may occasionally encounter issues, which are typically indicated by error codes. LG washer error codes serve as a diagnostic tool, helping users understand the specific problems that their washing machine is experiencing. These codes appear on the display panel of the device when the machine’s self-diagnostic system detects an operational fault. In most cases, knowing the meaning of these codes can help troubleshoot the problem, allowing you to fix it and get your machine back to normal operation. In this guide, we will explore how to easily fix five common LG washer error codes.

2. Understanding Error Code IE

The error code IE stands for "Inlet Error." This error code surfaces when the washing machine detects that water is not filling the drum effectively or quickly enough. Various reasons could cause this issue, such as a clogged inlet filter, a kinked water hose, or a problem with the water supply.

3. Detailed Steps to Fix Error Code IE

To fix the IE error code, begin by checking the washing machine’s water supply. Ensure that the faucets are fully open. Next, inspect the inlet hoses for kinks or damages that might prevent water from reaching the machine. If the hoses are fine, proceed to check the inlet filters. You can find these filters at the point where the hoses connect to the washing machine. If they appear clogged or dirty, clean them properly. If the issue persists after taking these steps, consider seeking professional help as the problem may lie with the water valve or pressure switch.

4. Understanding Error Code OE

The OE error code on an LG washer refers to a "Drain Error." The machine displays this code when it has difficulties draining the water from the drum. This situation could be due to a clogged drain hose, a faulty drain pump, or a blocked drain filter.

5. Detailed Steps to Fix Error Code OE

Resolving the OE error code involves inspecting the draining system of your washing machine. Start by examining the drain hose for clogs or kinks. If it looks fine, move on to check the drain filter. You can usually find this filter near the drain hose. If it’s clogged, clean it thoroughly. If these steps do not fix the problem, the drain pump might be defective and may require a professional to replace it.

6. Understanding Error Code UE

The UE error code means "Unbalanced Error." This error occurs when the washing machine detects an imbalanced load in the drum. The machine will try to redistribute the load by adding water and agitating the laundry. However, if the load remains unbalanced, the UE code will display.

7. Detailed Steps to Fix Error Code UE

To fix the UE error code, simply open the washing machine and redistribute the clothes evenly across the drum. If the error persists despite your efforts, try reducing the load size. In some cases, the issue could be due to a faulty sensor or control board, which would necessitate professional repair.

8. Understanding Error Code FE

If your LG washer displays the FE error code, it means "Fill Error." This code appears when the machine detects excess water filling the drum. The error could result from a malfunctioning water valve or a faulty control board.

9. Detailed Steps to Fix Error Code FE

Fixing the FE error code is a bit complex and might require professional assistance. However, you can start by turning off the washing machine and disconnecting it from the water supply. Then, reconnect it and observe if the machine fills with water even when it’s off. If it does, this indicates a defective water valve. If the machine doesn’t fill with water when off, but the error code persists, it could be a control board problem.

10. Understanding Error Code PE

The PE error code represents a "Pressure Sensor Error." This error surfaces when the machine can’t detect or measure the water level in the drum. This could be due to a faulty pressure sensor or a problem with the wiring.

11. Detailed Steps to Fix Error Code PE

Fixing the PE error code usually requires professional help. However, you can check the wiring connections to the pressure sensor for any obvious issues. If everything looks fine, it’s best to seek professional assistance to diagnose and fix the problem.

12. Preventative Measures against LG Washer Error Codes

Prevention is always better than cure. Regular maintenance of your LG washing machine can help prevent many of these error codes. Ensure the machine is properly leveled, and the hoses are kink-free and securely connected. Clean the inlet filters and drain filter regularly to prevent clogs. Avoid overloading the machine and distribute laundry evenly in the drum. Lastly, always use the machine as per the manufacturer’s instructions.

13. Conclusion: Maintaining Your LG Washer Error-Free

Fixing common LG washer error codes is often a straightforward process that you can handle without professional assistance. By understanding what each code means, you can quickly identify the problem and apply the appropriate fix. Regular maintenance and proper use of your washing machine are key to keeping it error-free. But remember, if the issue persists despite your best efforts, it’s always wise to seek professional help.

Final Thoughts

Understanding and fixing common error codes in your LG washing machine not only saves you time and money but also extends the machine’s lifespan. Regular maintenance and proper use contribute to efficient performance and less frequent errors. However, don’t hesitate to seek professional help when needed because some issues may require technical expertise.


Q1: What does the IE error code mean on my LG washer?

A1: The IE error code stands for "Inlet Error." It indicates that the machine is having difficulties filling with water.

Q2: How can I fix the UE error code on my LG washing machine?

A2: The UE error code means "Unbalanced Error." You can fix it by redistributing the clothes evenly in the drum or reducing the load size.

Q3: What does the OE error code on an LG washer indicate?

A3: The OE error code stands for "Drain Error." It means the machine is having problems draining the water from the drum.

Q4: What does the PE error code on my LG washing machine mean?

A4: The PE error code represents a "Pressure Sensor Error." It indicates a problem with the machine’s ability to detect or measure the water level in the drum.

Q5: Are there any preventative measures to avoid LG washer error codes?

A5: Yes. Regular maintenance, including cleaning the inlet filters and drain filter, checking hoses for kinks, and ensuring the machine is properly level, can help prevent these error codes. Also, avoid overloading the machine and always use it as per the manufacturer’s instructions.

Related posts
Windows Errors

my merch tmobile

As the dawn of digital merchandising sets in, one mobile‍ telecommunications giant fearlessly…
Read more
GeneralWindows Errors

How to Fix the 7 Common Printer Error State Problems: A Comprehensive Guide

Dealing with Printer Error State Problems effectively requires patience and a basic understanding of…
Read more
GeneralWindows Errors

How to Fix Nest Error E195: 5 Proven Solutions to Overcome this Issue

Table of Contents Toggle Understanding Nest Error E195Resetting Your Nest DeviceChecking the Wiring…
Read more
Become a Trendsetter
Sign up for Davenport’s Daily Digest and get the best of Davenport, tailored for you.